8
STORAGE
To store the
PILATES PREMIER
simply keep it in a clean dry place.
Moving the
PILATES PREMIER
:
To prevent the
CUSHION ASSEMBLY(10)
from moving, attach
one of the
TENSION CORD ASSEMBLIES(12)
in the slots on the
FRONT FRAME(1).
Lift up the
PILATES PREMIER
from the Rear Stabilizer to move the
PILATES PREMIER
with the transport
wheels on the Front Stabilizer.
1.
2.
MAINTENANCE
The safety and integrity designed into the
PILATES PREMIER
can only be maintained when the
PILATES
PREMIER
is regularly examined for damage and wear. Special attention should be given to the following:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
Worn or damaged components shall be replaced immediately or the
PILATES PREMIER
removed
from service until repair is made.
Verify that the
ROPES(18)
are properly installed on the
PULLEY ASSEMBLYS(22).
Check the condition of the
ROPES(18).
Replace the Rope if it is cracked or broken.
Check the
PLASTIC HOOKS(19)
on the ends of the
ROPES(18).
Replace the Ropes with deformed
or damaged hooks.
Check the
TENSION CORD ASSEMBLYS(12)
for wear. Replace the Cords that are frayed or worn.
Check the pulleys for excessive wear. Replace worn pulleys.
Check and clean the rollers and the rolling surfaces on the rail. Clean by wiping with a dry cloth.
Only Stamina Products supplied components shall be used to maintain/repair the
PILATES PREMIER.
Keep your
PILATES PREMIER
clean by wiping with an absorbent cloth after use.
