ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance
1 (800) 375-7520
or e-mail us at :
5
STEP 1
Remove your
PILATES PREMIER
from its packaging placing the product on its side, with the
LOCKING
PIN(26)
side upward. Remove the
LOCKING PIN(26)
and unfold the
MAIN FRAME ASSEMBLY
to a
flat position by moving the
FRONT FRAME(1)
away from the platform end of the product in a clockwise
position until fully extended.
STEP 2
Remove the paper covering from the foam tape inside the
FRONT END COVER(6)
and
REAR END
COVER(7).
Place the
FRONT END COVER(6)
over the
FRONT FRAME(1).
Press the
FRONT END
COVER(6)
securely in place. Place the
REAR END COVER(7)
over the
REAR FRAME(2).
Press the
REAR END COVER(7)
securely in place.
NOTE:
The securing
SCREWS(M6 x 35mm)(37)
for the
PULLEY ASSEMBLY(22)
on each side may
need to be loosened to allow the
REAR END COVER(7)
to fit securely over the frame. Refer to
illustration. When retightening the screws for the
PULLEY ASSEMBLY(22)
do not over tighten.
The
PULLEY ASSEMBLY(22)
should move freely.
