ASSEMBLY INSTRUCTIONS
NOTE: DO NOT SECURELY TIGHTEN ALL BOLTS UNTIL STEP 8.
STEP 1
Bolt the
MAIN STAND(1), CROSS BAR(4),
and
DIP STAND(5)
together with
HEX BOLTS
(M10x1.5x130mm)(21), ARC WASHERS(M10)(26),
and
NYLOCK NUTS(M10x1.5)(23).
Repeat on
other side.
STEP 2
There is a
“L”
decal on the
LEFT PUSH-UP BAR(6),
and a
“R”
decal on the
RIGHT PUSH-UP BAR(7).
Slide the
LEFT PUSH-UP BAR(6)
onto the
DIP STAND(5)
on the left side and secure with
HEX
BOLTS(M6x1x48mm)(19), ARC WASHERS(M6)(24),
and
NYLOCK NUTS(M6x1)(22).
Repeat on the
right side.
7
R
L
LEFT
RIGHT
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Service section and order the part needed,
e-mail us at [email protected], or call us toll free at 1-800-375-7520 (in the
U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
