ASSEMBLY INSTRUCTIONS
10
STEP 9
Insert the
PEDAL SHAFT(19)
through holes located on the
CENTER BEAM(2).
Slide a
PEDAL SPACER(20)
and a
PEDAL CAP(18)
onto each end of the
PEDAL SHAFT(19).
Then secure the
PEDAL CAPS(18)
with
BUTTON HEAD BOLTS(M8x1.25x15mm)(21)
and
LARGE WASHERS(M8)(22)
at both ends of the
PEDAL SHAFT(19).
NOTE:
You need to use two Allen Wrenches to tighten the
BUTTON HEAD BOLTS(M8x1.25x15mm)(21)
at both ends of the
PEDAL SHAFT(19)
at the same time.
Summary of Contents for InMotion Rower
Page 16: ...PRODUCT PARTS DRAWING 16 FRONT BACK...
Page 18: ...NOTES 18...
