![Stamina Brenda Dygraf's Fitrider Owner'S Manual Download Page 11](http://html1.mh-extra.com/html/stamina/brenda-dygrafs-fitrider/brenda-dygrafs-fitrider_owners-manual_1358639011.webp)
1. To store the
Fit Rider™,
simply keep it in a clean dry place.
2. To move the
Fit Rider™,
lift the
FRONT STABILIZER(26)
and the
REAR STABILIZER
on the
MAIN
FRAME(11).
The safety and integrity designed into the
Fit Rider™
can only be maintained when the
Fit Rider™
is
regularly examined for damage and wear. Special attention should be given to the following:
1.
Use a wrench to verify that the pedals are tightened securely. If tightening is required, remember that
the left pedal has left hand threads and is tightened by turning counterclockwise.
2. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
3. Verify that the
CAUTION LABEL(42)
is in place and easy to read. Call Stamina Products immediately
at
1-800-375-7520
for a replacement
CAUTION LABEL(42)
if it is missing or damaged.
4. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
5. Worn or damaged components shall be replaced immediately or the
Fit Rider™
removed from service
until repair is made.
6. Only Stamina Products supplied components shall be used to maintain/repair the
Fit Rider™.
7. Keep your
Fit Rider™
clean by wiping it off with an absorbent cloth after use.
STORAGE
MAINTENANCE
11