ASSEMBLY INSTRUCTIONS
7
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Service section and order the part needed,
e-mail us at [email protected], or call us toll free at 1-800-375-7520 (in the
U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Attach the
FRONT STABILIZER(4),
the shorter stabilizer with the
ENDCAPS(13)
, to the front of the
MAIN FRAME(1)
with
CARRIAGE BOLTS(M8x1.25x60mm)(16), WASHERS(M8)(27),
and
ACORN
NUTS(M8x1.25)(42).
STEP 2
Attach the
REAR STABILIZER(64),
the stabilizer with the
LEVELING CAPS(15),
to the
MAIN FRAME(1)
with
CARRIAGE BOLTS(M8x1.25x60mm)(16), WASHERS(M8)(27),
and
ACORN NUTS(M8x1.25)(42).
NOTE:
You can adjust the
LEVELING CAPS(15)
on the
REAR STABILIZER(64)
to keep the Bike stable.
STEP 3
Loosen and pull the
ADJUSTMENT KNOB(5),
then insert the
SEAT POST(3)
into the
MAIN FRAME(1)
and secure with the
ADJUSTMENT KNOB(5).
NOTE:
The pin of the
ADJUSTMENT KNOB(5)
must be inserted into one of the adjustment holes in the
SEAT POST(3)
and the
ADJUSTMENT KNOB(5)
must be screwed in tight to ensure that the
SEAT
POST(3)
will fit securely in the
MAIN FRAME(1).
Summary of Contents for AVARI Upright Bike
Page 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK...
Page 21: ...NOTES 21...
