ASSEMBLY INSTRUCTIONS
9
STEP 4
Locate the
C Ring(48)
on the
STOPPER BAR(56).
Insert the longer end of the
STOPPER BAR(56)
through
the
MAIN FRAME(1).
Secure the
STOPPER BAR(56)
in position with the
SPRING CLIP(46).
STEP 5
There is a
“L”
decal on the
LEFT PEDAL CAP(43L),
and a
“R”
decal on the
RIGHT PEDAL CAP(43R).
Insert the
PEDAL SHAFT(45)
through the holes on the
MAIN FRAME(1).
Place the
LEFT PEDAL
CAP(43L)
onto the left end of the
PEDAL SHAFT(45)
and place the
RIGHT PEDAL CAP(43R)
onto
the right end of the
PEDAL SHAFT(45),
and slide them toward the
MAIN FRAME(1).
Then secure the
PEDAL CAPS (43L, 43R)
with
WASHERS(M8)(42), LOCK WASHERS(M8)(34),
and
BUTTON HEAD
BOLTS(M8x1.25x15mm)(57)
at both sides of the
PEDAL SHAFT(45).
NOTE:
You need to use two Allen wrenches to tighten the
BUTTON HEAD BOLTS(M8x1.25x15mm)(57)
at both ends of the
PEDAL SHAFT(45)
at the same time.
L
R
