background image

MAINTENANCE

The safety and integrity designed into the 

AeroPilates

 Premier Studio

 can only be maintained when 

the 

AeroPilates

 Premier Studio 

is regularly examined for damage and wear. Special attention should 

be given to the following:

It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.

Worn or damaged components should be replaced immediately or the 

AeroPilates

 Premier Studio

 

removed from service until repair is made.

Verify that the 

CAUTION LABEL(68)

 is present and legible. Replace the 

CAUTION LABEL(68)

 if it is 

missing or damaged.

Verify that the 

ROPES(18)

 are properly installed on the 

PULLEY SETS(22).

Check the condition of the 

ROPES(18)

 and replace if they are frayed or worn.

Check the 

PLASTIC SNAP HOOKS(19)

 on the ends of the 

ROPES(18). 

Replace the 

ROPES(18)

 if 

PLASTIC SNAP HOOKS(19)

 are damaged or deformed.

Check the 

TENSION CORDS(10).

 If a 

TENSION CORD(10)

 is stretched and loose, re-tie the knot on 

the end of the cord. Replace 

TENSION CORDS(10)

 that are frayed or worn.

Check the 

BUNGEE CORD(52)

 on the 

CARDIO REBOUNDER(50)

 for wear. Replace the 

CARDIO 

REBOUNDER(50)

 if the 

BUNGEE CORD(52)

 is frayed or worn.

Check the 

PULLEY SETS(22)

 for excessive wear. Replace worn 

PULLEY SETS(22).

Check the 

HAND STRAPS(20)

 and replace if damaged or worn.

Check the 

FOAM SLEEVE(6)

 and 

FOAM PADS(16)

 and replace if damaged or worn.

Check the 

STOP PLATES(30, 31)

 for looseness or damage and replace if damaged or worn.

Check the 

CUSHION(13)

 and replace if it is damaged or worn.

Check and clean the 

ROLLERS(8)

 and the rolling surfaces on the rails. Clean by wiping with a dry cloth.

Only  Stamina  Products  supplied  components  shall  be  used  to  maintain/repair  the 

AeroPilates

 

Premier Studio.

Keep your 

AeroPilates

 Premier Studio

 clean by wiping with an absorbent cloth after use.

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

12

OPERATIONAL INSTRUCTIONS

HEADPAD ADJUSTMENT AND USE

The 

HEADPAD(60)

 is designed to support the natural curve 

of your neck. It can be used to provide comfort, support and 

postural alignment for reformer exercises that are performed 

while lying on your back. Do not use the 

HEADPAD(60)

 for 

exercises that require you to lift your hips higher than your 

head.

With  the 

HEADREST(14)

  in  the  flat  position,  place  the 

HEADPAD(60)

  on  top  of  the 

HEADREST(14)

  with  the 

thickest part of the 

HEADPAD(60)

 under your neck. Make 

sure that the elastic strap on the 

HEADPAD(60) 

is around 

the 

HEADREST(14).

Make sure that both FOAM PADS(16) are in 

the carriage when using the HEADPAD(60) 

attached to the HEADREST(14).

Store the 

AeroPilates

 Premier Studio

 in a clean, dry place.

It is recommended that two people be available to move the 

AeroPilates

 Premier Studio.

To move the 

AeroPilates

 Premier Studio:

  First, attach one of the 

TENSION CORDS(10)

 in the 

slot on the 

FRONT FRAME(1)

 to prevent the 

CARRIAGE(7)

 from moving. Second, grasp the 

FRONT

 

and 

REAR FRAME(1, 2)

 to remove the 

AeroPilates

 Premier Studio

 from its stand. Third, lift up the 

AeroPilates

 Premier Studio

 from the 

REAR FRAME(2)

 to move the 

AeroPilates

 Premier Studio

 

with the transport wheels on the 

FRONT FRAME(1).

 Fourth, grasp both ends of the stand to move it.

STORAGE

1.

2.

3.

Summary of Contents for AeroPilates Premier Studio




















Reviews: