8
ASSEMBLY INSTRUCTIONS
STEP 2
Remove your
AeroPilates
Premier Studio
from its packaging, placing the product on its side with the
LOCKING PIN(69)
side upward. Remove the
LOCKING PIN(69)
and unfold the
MAIN FRAME ASSEMBLY
separating the half that has the attached
LOCKING PIN(69).
When completed, the frame should form a
“V”
with the frame ends separated approximately three feet.
STEP 3
Attach the four
RUBBER FEET(28)
to the
FRONT FRAME(1)
and
REAR FRAME(2)
with
ROUND HEAD
SCREWS(M5x0.8x25mm)(38).
Attach the
WHEELS(27)
to the
FRONT FRAME(1)
with
WASHERS(M8)
(47)
and
NYLOCK NUTS(M8x1.25)(42).
STEP 4
Unfold your
AeroPilates
Premier Studio
to a flat position by moving the
FRONT FRAME(1)
away from
the platform end of the product in a clockwise position until fully extended.
