ASSEMBLY INSTRUCTIONS
10
(53) Front Stand
( Wider )
(55) Rear Stand
( Narrower )
Slots
STEP 9
Insert the
FOAM PAD ASSEMBLIES(16)
into the holes located on the
CARRIAGE(7).
Place the
HAND
STRAPS(20)
onto the
FOAM PAD ASSEMBLIES(16)
for storage.
STEP 10
Refer to the inset drawing. To prevent the
CARRIAGE(7)
from moving while placing the
AeroPilates
Premier Studio
onto its stand, attach one of the
TENSION CORDS(10)
in the slot on the
FRONT FRAME(1).
Place the
AeroPilates
Premier Studio
onto the stand as shown in the illustration.
NOTE:
The rubber feet of the
AeroPilates
Premier Studio
must fit into the
FRONT STAND(53)
and
the
REAR STAND(55).
The
FRONT STAND(53)
is wider than the
REAR STAND(55).
The footbar
end of your
AeroPilates
Premier Studio
will fit into the top of the
FRONT STAND(53)
and the
headrest end of your
AeroPilates
Premier Studio
will fit into the
REAR STAND(55).
