Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the
packing materials until assembly is completed. Read each step carefully before beginning. If you
are missing a part please call our toll-free number for assistance
1-800-375-7520
or e-mail us at
ASSEMBLY INSTRUCTIONS
7
STEP 1
Remove your
AeroPilates
® Performer 271
from its packaging, placing the product on its side with
the
LOCKING PIN(28)
side upward. Remove the
LOCKING PIN(28)
and unfold the
MAIN FRAME
ASSEMBLY
separating the half that has the attached
LOCKING PIN(28).
When completed, the frame
should form a
"V"
with the frame ends separated approximately three feet.
STEP 2
Attach the four
RUBBER FEET(31)
to the
FRONT FRAME(1)
and
REAR FRAME(2)
with
ROUND HEAD
SCREWS(M5x0.8x35mm)(38).
The
ROUND HEAD SCREWS(M5X0.8X35mm)(38)
are already in the
RUBBER FEET(31).
Attach the
PLASTIC WHEELS(27)
to the
FRONT FRAME(1)
with
WASHERS(M8)
(47)
and
NYLOCK NUTS(M8)(42).
STEP 3
Unfold your
AeroPilates
® Performer 271
to a flat position by moving the
FRONT FRAME(1)
away
from the platform end of the
REAR FRAME(2)
in a clockwise position until fully extended. Lower the
AeroPilates
® Performer 271
so all four
RUBBER FEET(31)
are flat on the floor.
Summary of Contents for Aero Pilates Performer 271
Page 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK ...
Page 22: ...NOTES 22 ...