OPERATIONAL INSTRUCTIONS
10
HEADREST ADJUSTMENT
The
HEADREST(15)
on the
CARRIAGE(7)
can be
positioned at an incline by simply pivoting the
SUPPORT
BRACKET
underneath the
HEADREST(15).
ROPE LENGTH ADJUSTMENT
The
ROPES(18)
feed through the
PULLEY SETS(22)
then
thread through the loops on the underside of both outer
edges of the
CARRIAGE(7).
PLASTIC SNAP HOOKS(19)
on the end of each rope are used to adjust the
ROPE(18)
length. If more length is needed, as when performing some
leg exercises, then attach the
PLASTIC SNAP HOOKS(19)
to loop
D.
To shorten, as when performing some arm
exercises, then bring the
ROPES(18)
around the last loop
D
and secure to loops
A, B,
or
C
with the
PLASTIC SNAP
HOOKS(19).
Wrap the
ROPES(18)
around and through
the loops again and attach where needed to shorten
ROPES(18)
even more.
LOAD ADJUSTMENT
There are two
TENSION CORDS(10)
and one heavier
RED
POWER CORD(11).
The resistance of the
CARRIAGE(7)
can be adjusted by
securing the
TENSION CORDS(10, 11)
in the slots located
on the
FRONT FRAME(1).
You can achieve various levels
of resistance by securing different numbers of the
TENSION
CORDS(10, 11)
in the slots.
NOTE:
To achieve greater resistance in the
RED POWER
CORD(11)
and
TENSION CORDS(10),
stretch and
re-tie the tension cords in a more taut position.
B
C
D
Support
Bracket
SLOTS
A
Summary of Contents for Aero Pilates Performer 271
Page 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK ...
Page 22: ...NOTES 22 ...
