Place the
AVARI® 2000C Upright Bike
in the area where it will be used. It is recommended that the
AVARI® 2000C Upright Bike
be placed on an equipment mat. The maximum operation dimensions of
the
AVARI® 2000C Upright Bike
are approximately 46.5 inches long x 23.8 inches wide x 58.6 inches
tall. (These dimensions may vary up to one inch.) An area 4 feet wide x 6 feet long is required for safe
operation of the
AVARI® 2000C Upright Bike.
Make sure that adequate space is available for access to
and passage around the
AVARI® 2000C Upright Bike.
LEVELING:
Turn the dials in the
ADJUSTABLE ENDCAPS(35)
which are attached to the
REAR
STABILIZER(2)
to keep the bike stable. Adjust as needed so that the bike sits on the floor
without rocking.
MOVING:
The
AVARI® 2000C Upright Bike
has a pair of wheels built into the
LEFT
and
RIGHT
ENDCAPS(83, 84)
at the front. Grasp the
HANDLEBAR(4)
and tip the
AVARI® 2000C
Upright Bike
forward to move.
FUNCTION INSPECTION:
Visually inspect the
AVARI® 2000C Upright Bike
to verify that assembly is as shown in the above
illustration. Check the function of the
AVARI® 2000C Upright Bike
by turning the crank slowly through
one complete revolution to verify that the drive train functions properly. Adjust the
TENSION KNOB(25)
and verify that it functions properly.
CAUTION:
Locate and read the
CAUTION LABEL(74)
on the
AVARI® 2000C Upright Bike.
Make sure
that all users read the
CAUTION LABEL(74)
before using the product.
SET UP INSTRUCTIONS
12
Equipment Mat
(not included)
Dial
Dial
