background image

15

STORAGE

MAINTENANCE

Check the angle adjustment tube, traction bars, ball pins, pivot arms, cushion bed, heel holders, foam
pads, spring pin, and warning label for

 

damage and wear.

Replace damaged and worn components immediately and/or keep the equipment out of use until repairs
are complete.

1.

2.

The safety level of the 

Elite Inversion System

 can be maintained only if it is examined regularly for

damage and wear.

The 

Elite Inversion System 

is designed to fold for easy storage.  You can store

your 

Elite Inversion System 

as illustrated.  Please follow the following process:

When folding and unfolding the 

Elite Inversion System,

 keep all children away from the

Elite Inversion System 

and make sure your hands are clear of any folding or pinch point.

Lowest
Adjustment Hole

1.

WARNING:

3.

2.

STEP 1:  

Loosen 

LOCKING KNOB(36)

 and pull out the

SPRING PIN(35).

  Now, slide the 

HEIGHT ADJUSTMENT

BEAM(10)

 into the 

MAIN FRAME(

92

)

 and lock in the lowest

adjustment hole.  Refer to illustration 1.

STEP 2:  

Remove the 

PULL PINS(86)

 from the 

ANGLE

ADJUSTMENT BARS(85).

  Swing the 

NYLON BED(37)

down to about the same place as the Rear Frame and lock in
position by inserting the 

PULL PINS(86) 

into the second

adjustment holes in the 

ANGEL ADJUSTMENT BARS(85)

above the 

SUPPORT SLEEVE(84).

  Refer to illustration 2.

STEP 3:  

Remove the 

LONG BALL PINS(46)

 from the

REAR FRAMES(2, 3).

  Fold the Front Frame close to the

Rear Frame as Illustration 3 shows.  Insert the 

LONG BALL

PINS(46)

 back into the 

REAR FRAMES(2, 3)

 to lock the

Elite Inversion System 

in the folded position.

Insert the PULL PINS(86)
into the second
adjustment holes.

Summary of Contents for 55-1537C























Reviews: