ASSEMBLY INSTRUCTIONS
7
STEP 3
Slide the bottom of the two
PIVOT ARMS(5)
into the brackets located at each side of the
MAIN FRAME(4).
Align the desired hole on the arm with the peg on the bra cket, and insert the peg into the hole to lock the
PIVOT ARMS(5)
in position.
Then secure the PIVOT ARMS(5) on the pegs with ROUND HEAD BOLTS
(M6x1x10mm)(38) and LARGE WASHERS(M6)(44).
PIVOT ARM ADJUSTMENT:
There are three adjustment holes on the
PIVOT ARMS(5)
allowing you to position the
MAIN FRAME(4)
at
three different heights. The lowest hole will allow the least amount of inversion angle. The top hole will allow
the greatest amount of inversion angle.
CAUTION:
STEP 4
Attach the
MAIN FRAME(4)
with the adjusted
PIVOT ARMS(5)
onto the
REAR FRAME(2)
by sliding the
slots in the ends of the two
PIVOT ARMS(5)
into the slots on the
REAR FRAME(2)
.
Use the lowe st holes in the
PIVOT ARMS(5)
until you be come familiar with the
Gravity
Inversion Therapy Table.
Both
PIVOT ARMS(5)
must be a djusted to the sa me hole. Trying to a djust the
PIVOT
ARMS(5)
to different positions could cause damage to the machine, and injury to the user.
1.
2.
SLOTS
Summary of Contents for 55-1532A
Page 14: ...PRODUCT PARTS DRAWING BACK FRONT 14...
Page 17: ...NOTES 17...
