Stamina 55-1532A, Owner'S Manual

Page: 5 / 18

5
Part No. and Description Qty
42 Nylock Nut (M6 x 1) 2
38 Bolt, Round Head (M6 x 1 x 10mm) 2
40 Bolt, Hex Head (M6 x 1 x 47mm) 2
44 Larger Washer (M6) 2
45 Washer (M6) 4
HARDWARE IDENTIFICATION CHART
This chart is provided to help identify the hardware used in the assembly process. Place the washers, the
end of the bolts, or screws on the circles to check for the correct diameter. Use the small scale to check the
length of the bolts and screws.
NOTICE: The length of all bolts and screws except those with flat heads is
measured from below the he ad to the end of the bolt or screw .
Flat head bolts a nd screws are me asured from the top of the
head to the end of the bolt or screw.
mm.
in.
INCHES
MILLIMETERS
1 1/2 0 2 1/2 3 1/2 4 1/2 5 1/2 6 1/2
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
6 8 10 12
3/16" 5/16" 1/2" 3/8" 1/4"
length
length
After unpacking the unit, open the hardware bag a nd make sure that you have all the f ollowing items.
Some hardware may be already attached to the part.