Stamina 55-1521, Owner'S Manual

Page: 8 / 22

ASSEMBLY INSTRUCTIONS
8
STEP 6:
Insert the
LEFT PIVOT ARM(6)
into the
LEFT FRONT FRAME(1)
and secure with the
LARGE WASHER(M8)(41)
and
BUTTON HEAD BOLT(M8 x 15mm)(51).
Repeat on other side.
STEP 7:
Place the
BACK FRAME(8)
between the Brackets of the
LEFT
and
RIGHT PIVOT ARMS
(6, 7)
and secure with
BUTTON HEAD BOLTS(M8 x 60mm)(54), NYLOCK NUTS(M8)(57),
and
WASHERS(M8)(60).
STEP 8:
Grasp the
LEVER(30)
and then Insert the
BACK SUPPORT BAR(9)
into the
SLIDER
SUPPORT(10).
Release the
LEVER(30)
to lock the
BACK SUPPORT BAR(9)
in one of the adjustment
holes. Attach the
BACK SUPPORT BAR(9)
onto the Bracket on the
BACK FRAME(8)
with
HEX
HEAD BOLT(M10 x 90mm)(55), NYLOCK NUT(M10)(58),
and
WASHER(M10)(61).
STEP 9:
Attach the
SEAT FRAME(11)
onto the
BACK FRAME(8)
with
BUTTON HEAD BOLTS
(M8 x 60mm)(54), NYLOCK NUT(M8)(57),
and
WASHERS(M8)(60).
SEAT FRAME HEIGHT ADJUSTMENT
There are adjustment holes on the
BACK FRAME(8)
allowing you to position the
SEAT FRAME(11)
at
three different heights. In the highest position, it is easier to invert but more difficult to recover from inversion.
In the lowest position, it is more difficult to invert but easier to recover from inversion. Tall people may prefer
the lowest position and shorter people may prefer the highest position.