Stamina 55-1521, Owner'S Manual

Page: 10 / 22

ASSEMBLY INSTRUCTIONS
10
STEP 12
Refer to the Bottom View in the illustration. Attach the
BELT GUIDES(21)
onto the
SEAT CUSHION(18)
with
BUTTON HEAD BOLTS(M8 x 15mm)(51)
and
WASHERS(M8)(60).
Make the Securing Pad face
down and insert the
SEAT BELT(20)
through the
BELT GUIDES(21)
under the
SEAT CUSHION(18).
Move the
SEAT CUSHION(18)
to the center of the
SEAT BELT(20).
Attach the
SEAT CUSHION(18)
onto the
SEAT FRAME(11)
with
BUTTON HEAD BOLTS(M8 x 15mm)(51)
and
WASHERS(M8)(60).
Securing Pad
must face down
BOTTOM VIEW
STEP 13
Pull down the
SPRING KNOB(22)
then insert the
LEG SUPPORT FRAME(12)
into the
SEAT
FRAME(11).
Release the
SPRING KNOB(22)
to lock the
LEG SUPPORT FRAME(12)
in one of the
adjustment holes.
STEP 14
Attach the
FOAM SUPPORT(13)
to the
LEG SUPPORT FRAME(12)
by pulling the
BALL SPRING
PIN(26)
and sliding the
FOAM SUPPORT(13)
completely into the
LEG SUPPORT FRAME(12).
Put
a
WASHER(M6)(59)
onto the
BUTTON HEAD BOLT(M6 x 47mm)(50)
and insert the bolt halfway
through the square tube on the
LEG SUPPORT FRAME(12),
slide the bolt through the loop on the end
of the
SPRING(25),
slide the bolt through the square tube and secure with
NYLOCK NUT(M6)(56)
and
WASHER(M6)(59).
Press the
SQUARE PLUG(46)
into the
LEG SUPPORT FRAME(12).
Slide the
FOAM PADS(23)
onto both sides of the
FOAM SUPPORT(13).