Stamina 15-4800R, Owner'S Manual

Page: 9 / 22

9
SET UP INSTRUCTIONS
Place the
4800R Recumbent Bike
in the area where it will be used. It is recommended that the
4800R
Recumbent Bike
be placed on an equipment mat. The
4800R Recumbent Bike
is approximately
63" long (max.) x 28" wide x 33" tall. (These dimensions may vary up to one inch.) An area 4 feet wide x 7
feet long is required for safe operation of the
4800R Recumbent Bike
. Make sure that adequate space
is available for access to and passage around the
4800R Recumbent Bike
.
Adjust the
LEVELING CAPS(49)
on the
REAR STABILIZER(4)
so that the Recumbent
Bike sets on the floor without rocking.
The
4800R Recumbent Bike
has a pair of
WHEELS(48)
on the
FRONT STABILIZER(2).
Lifte up from
REAR STABILIZER(4)
to move the
4800R Recumbent Bike
.
LEVELING:
MOVING:
FUNCTION INSPECTION:
Visually inspect the
4800R Recumbent Bike
to verify that assembly is as shown in the above illustration.
Check the function of the
4800R Recumbent Bike
. Turn the crank slowly through one complete revolution
to verify that the drive train functions properly. Adjust the
TENSION KNOB(24)
and verify that it functions
properly.
CAUTION:
Locate and read the
WARNING LABEL(75)
on the
4800R Recumbent Bike
. Make sure
that all users read the
WARNING LABEL(75).
EQUIPMENT MAT
Please note the Rear Frame of the
Recumbent Bike is adjustable, use the
longest size to determine the size of the mat.