33
35
34
36
71
46
45
9
71
45
46
71
59
45
13
8
2
1
ASSEMBLY INSTRUCTIONS
STEP 7
NOTE:
The
RIGHT PEDAL(34)
has an
R
stamped on the end of the pedal shaft. The
RIGHT PEDAL(34)
has right hand threads and is tightened by turning clockwise. The
LEFT PEDAL(33)
has an
L
stamped on the end of the pedal shaft. The
LEFT PEDAL(33)
has left hand threads and is tightened
by turning counterclockwise.
Thread the
RIGHT PEDAL(34)
into the right side of the
CRANK(13)
as shown. Tighten the pedal securely.
The shoulder of the
PEDALS(33, 34)
should be in contact with the
CRANK(13)
when securely tightened.
Select the
RIGHT PEDAL STRAP(36)
which has an
R
marked on it. Snap the three hole end to the inside
edge of the
RIGHT PEDAL(34).
Snap the other end of the strap to the hook on the outside edge of the
RIGHT PEDAL(34).
Select adjustment holes which allow your foot to be easily removed from the pedals.
Use the same procedure to attach the
LEFT PEDAL(33)
to the
CRANK(13)
and to attach the
LEFT PEDAL
STRAP(35)
to the
LEFT PEDAL(33).
STEP 8
Connect the
EXTENSION WIRE(8)
to the
SENSOR WIRE(9).
Insert the
UPRIGHT(2)
onto the
FRONT
FRAME(1)
and secure with
BUTTON HEAD BOLTS(M8x1.25x15mm)(45), LOCK WASHERS(M8)(71),
WASHERS(M8)(59),
and
ARC WASHERS(M8)(46).
10
Shoulder
Shoulder
Summary of Contents for 15-1345
Page 2: ......
Page 22: ...NOTES 22...
