4 feet
6 feet
Place the
INTONE® Folding
Cycle Pro
in the area where it will be used. It is recommended that the
INTONE® Folding
Cycle Pro
be placed on an equipment mat. The
INTONE® Folding
Cycle Pro
is
approximately 39 inches long x 26.2 inches wide x 44.5 inches tall. (These dimensions may vary up
to one inch.) An area 4 feet wide x 6 feet long is required for safe operation of the
INTONE® Folding
Cycle Pro
.
Make sure that adequate space is available for access to and passage around the
INTONE®
Folding
Cycle Pro
.
LEVELING:
Adjust the location of
INTONE® Folding
Cycle Pro
so the bike sits on the floor without
rocking.
MOVING:
The
INTONE® Folding
Cycle Pro
has a pair of
WHEELS
on the
WHEEL ENDCAPS(50)
on
the
REAR STABILIZER(3).
Hold the
HANDRAIL(7)
to move the
INTONE® Folding
Cycle
Pro
.
FUNCTION INSPECTION:
Visually inspect the
INTONE® Folding
Cycle Pro
to verify that assembly is as shown in the above
illustration. Check the function of the
INTONE® Folding
Cycle Pro
by turning the crank slowly through
one complete revolution to verify that the drive train functions properly. Adjust the
TENSION KNOB(25)
and verify that it functions properly.
CAUTION:
Locate and read the
WARNING LABEL(75)
on the
INTONE® Folding
Cycle Pro
.
Make sure
that all users read the
WARNING LABEL(75)
before using the product.
SET UP INSTRUCTIONS
10
Equipment Mat
(not included)
Summary of Contents for 15-0201
Page 16: ...PRODUCT PARTS DRAWING 16 FRONT BACK ...
Page 20: ...NOTES 20 ...
Page 21: ...NOTES 21 ...
