STALEX C0632D, Operations Manual & Parts List

Page: 10 / 58

Operation Manual
8
4. Unpacking and Installation
4.1. Unpacking
Unload the machine with a tackle, using clamping plates and eyebolts. Keep the
machine in balance by moving the tailstock and the bed slide to the right. Avoid using
sling chains as they could damage to feed rod and leadscrew. Lift the lathe carefully and
place it softly into the floor or workbench.
4.2. Cleaning
Before taking the machine into operation, using kerosene (paraffin) or white spirit to
remove the anti-corrosive coating or grease from all slideways and gear train. Don
’
t use
lacquer thinner or other caustic solvents. Oil all bright machine surfaces immediately after
cleaning. Use heavy oil or grease on the change gears.
4.3. Installation
Place the lathe on a solid foundation. A concrete floor is the best base for the
machine. (If necessary, use an under frame operational). Make sure there is sufficient
area around the lathe for easy work and maintenance. Use a precision level on the
bedways to make further adjustment for level condition, then tighten the foundation bolts
evenly and finally recheck for level condition.