STALEX C0632D, Operations Manual & Parts List

Page: 7 / 58

Operation Manual
5
Always wear the correct protection for even a short time when operating the
lathe.
Never remove protection for even a short time when operating the lathe.
Wear protection devices correctly.
Know the correct way to wear protective devices.
(36) Beware of material flying from the lathes.
(37) Keep protective guards at the point of operation.
Know how to set or attach protective guards properly.
Never use the wrong protective guard.
(38) (a) When the chuck and workpiece are in motion never reach over, under or
around a workpiece to make an adjustment.
(b) Never reach over, under or around a workpiece to retrieve anything.
(c) Beware of there you leave your tools during set up.
(d) Never reach over, under or around workpiece to move hand tool/lathe to
another position.
(e) Never reach over, under or around the workpiece to tighten a lathe part.
(f) Never reach over, under or around workpiece to remove swarf.
(39) Know the proper procedure for applying loads.
Never apply force form an awkward position.
(40) Never mount a workpiece too large for the lathe.
(41) Never mount a workpiece too large for the operator to handle.
(42) Use the equipment necessary for handling workpiece.
(43) Never apply undue force on the accessory or control lever.
(44) Secure all workpiece.
(45) Secure all jaws, nuts, bolts and locks.
(46) Always use the excessive force in polishing, filling and deburring.
(47) Never take cuts beyond lathe
’
s capability.
(48) Never use excessive force in polishing, filling and deburring.
(49) Always use the proper hand tool to remover swarf. Never hurry to remove
swarf bewares of swarf wrapped around the chuck or workpiece.
(50) Never change gears by moving them with your hands.
(51) Beware of tools/lathe parts falling on controls.