Instruction manual
18
27/04/2022 Rev:1.0.0
7.4 Disposal of the filter cartridge
The filter cartridge can be reused after washing it under running water.
ATTENTION: before replacing the filter cartridge back in the system after washing, ensure it has
completely dried. DO NOT reassemble the filter cartridge if the surface is still wet or damp
Check that the filter surface is not
cut. If this is the case, the cartridge
should not be used again and
should be definitely replaced.
2
Before washing the cartridge it is always recommended to
vacuum clean the dirty surface with an auxiliary suction cleaner
or with the utility/service inlet, remembering to insert a spare
cartridge in the system before use.
1
ATTENTION
YOU SHALL ALWAYS CHECK THE RIGHT POSITIONING AND TIGHTENING
OF THE FILTER CARTRIDGE. A WRONG POSITIONING MAY CAUSE
A SERIOUS DAMAGE OF THE PRODUCT.
DO NOT USE THE VACUUM CLEANER WITHOUT THE FILTER CARTRIDGE.
ENSURE YOU HAVE REPLACED A SPARE FILTER CARTRIDGE BEFORE
CARRYING OUT THIS OPERATION.
8 - REPAIRS AND SPARE PARTS
8.1 Intervention criteria
Any intervention on the vacuum cleaner for repairs and/or maintenance which are not expressly authorized
in this manual is absolutely forbidden.
Any repair for breakage or malfunctioning must be carried out by qualified Technical Assistance personnel.
Any intervention of non-authorized personnel will result in the invalidation of any guarantee of the product
and the manufacturer will not be held responsible for any eventual damage to persons and/or objects due
to such interventions.
8.2 Recommended spare parts
It is advisable to order in time those spare parts which need to be changed more often.
In order to guarantee the optimal and long working life of the vacuum cleaner it is recommended to use
only original spare parts
9 THERMAL SWITCH
The thermal switch prevents damages to the electric and electronic parts from power overloads and from
short-circuits. The switch button is located inside its lodging during the regular functioning of the machine,
while in case of activated protection it will be out of its lodging. The reactivation of the switch must be done
manually by pushing the button back into its lodging. This operation will be effective only if the cause of
the blocking has been fixed. If the blocking occurs regularly, it is advisable to let a specialized technician
verify the correct functioning of the machine.
