Press
[FUNC]
until the display shows
. The device operates in stand alone mode and dis‐
plays a preprogrammed show that may run sound controlled via the built-in microphone, if
desired. Use the
[UP]
and
[DOWN]
buttons to select one of the preprogrammed shows listed in
the table below. Press
[ENTER]
to save the value and to start operation in ‘Auto Show’ mode.
Display
Show
Automatic show in random order
Sound-controlled automatic show in random order
Press
[FUNC]
repeatedly until the display shows
and starts flashing. In this menu, the sen‐
sitivity and thus the response characteristic of the microphone is set. Use the
[UP]
and
[DOWN]
buttons to select the settings ‘S 0’ (sensitivity = 0, operation mode ‘Sound-controlled’ is off) or
„S 1“ (low sensitivity) to „S 9“ (high sensitivity). Press
[ENTER]
to save the setting.
Operating mode ‘Auto Show’
Response characteristic
Operation
showlaser
38
Summary of Contents for DJ Lase 150-R MK-III
