Stairville CB-100 LED Color Beam, User Manual

Page: 29 / 44

Press [MODE/ESC] repeatedly until the display shows ‘MAn’ . Press [ENTER] to activate the oper‐
ating mode. Press [UP] or [DOWN] until the display shows ‘diMM’ . Press ‘Enter’ again, the dis‐
play shows ‘Lxxx’ . Now use [UP] and [DOWN] to adjust the brightness (display shows ‘L000’ …
‘L255’ ).
When the display shows the desired value, press [ENTER] to confirm the setting and then
[MODE/ESC] to proceed to the next menu item. To change the menu item without making any
adjustment, press [MODE/ESC] .
Press [MODE/ESC] repeatedly until the display shows ‘diS’ . Now use [UP] and [DOWN] to toggle
between ‘rdiS’ (display text is shown upside down) and ‘dIS’ (display text is shown normally).
When the display shows the desired value, press [ENTER] to confirm the setting and then
[MODE/ESC] to proceed to the next menu item. To change the menu item without making any
adjustment, press [MODE/ESC] .
Press [MODE/ESC] repeatedly until the display shows ‘tCxx’ . The display shows the current tem‐
perature of the LED.
Press
[MODE/ESC] to quit the menu.
Dimmer setting
Display reversal
Temperature display
Operation
CB-100 LED Color Beam
29