Stairville CB-100 LED Color Beam, User Manual

Page: 28 / 44

Press [MODE/ESC] repeatedly until the display shows ‘dxxx’ . Now you can set the number of
the first DMX channel to be used by the device (DMX address). Use [UP] and [DOWN] to select a
value between 1 and 512 (display shows ‘d001’ … ‘d512’ ).
When the display shows the desired value, press [ENTER] to confirm the selection, and then
[MODE/ESC] to proceed to the next menu item. To change the menu item without making any
adjustment, press [MODE/ESC] .
Make sure that this number matches the configuration of your DMX controller. The highest
possible DMX address is 509.
Press [MODE/ESC] repeatedly until the display shows ‘NAn’ . Press [ENTER] to activate the oper‐
ating mode. Press [UP] or [DOWN] until the display shows ‘Colr’ . Press ‘Enter’ again, the display
shows ‘Coxx’ . Now use [UP] and [DOWN] to select from 18 colour settings (display shows
‘Co00’ … ‘Co17’ ).
When the display shows the desired value, press [ENTER] to confirm the setting and then
[MODE/ESC] to proceed to the next menu item. To change the menu item without making any
adjustment, press [MODE/ESC] .
DMX address
Manual colour setting
Operation
LED spotlight
28