Specifications
GL-SD60 Outlook
Users’ Manual
GL-SD60
1. The warranty period will last for two years since your purchase of the
products. If the product fails or malfunctions under the proper installation and
normal usage within the warranty period, please send it back to our company
with our RMA approval or contact your local distributors for free repairing
and/or replacing services.
2. Please do not add/remove any electrical components to/from the products or
change/tamper the original electrical design without our permission.
3. Please do not add/remove any mechanical components to/from the products
or change/tamper the original mechanical design without our permission.
4. Please store or use the products in an environment that meets the
temperature and humidity conditions designated by the product specifications.
Please do not uncover the GL
-
SD60 series LED products, lest waterproof and
dustproof become invalid.
5. To avoid any electrical shock or functional damage, please do not insert any
foreign objects into the products.
6. For further information, please contact us.
CAUTIONS
GL-SD60
12/24V DC 68W IP66
1. Before installation, please
turn off the power switch
for the existing lamp.
4. Please insulate properly the wires/terminals of
the DC voltage source, screw tightly the
GL
SD60 series LED products onto a wall or a
stand, and adjust freely the lighting angle in
accordance with individual needs.
5. Please turn on the DC voltage source to check
whether the GL
SD60 series LED products can work
normally. If not, please check carefully whether all
the above installation steps are taken and usage
conditions are met.
Installation Steps
Optical
Mechanical and Dimension
Electrical
Temperature Condition
Model No.
CCT (Typical)
GL-SD60-WW
(Warm White)
GL-SD60-CW
(Cool White)
Luminous Flux (lm)
Typical Luminous Efficacy
CRI (Ra)
Beam Angle
Net. Weight
Cover
3000 K
6000 K
2,695 lm
3,795 lm
40 lm / W
56 lm / W
> 80
> 75
30° / 60° (Optional)
Outline Dim.
405× 305 × 135 (mm)
68 W
3.5 (Kgs)
-20 °C
－
+40 °C
-40 °C
－
+85 °C
Clear
Typical Power consumption
Input Voltage
Operating Temperature
Storage Temperature
11-15V DC / 22-30V DC
2. Please make sure that both the
DC voltage source and the
power connector are compatible
with the GL
SD60 series LED
products. The DC voltage
source may be provided by an
AC adapter, a DC battery, and
so on as long as it meets the
specifications.
Thank you for choosing the
GL-SD60 series LED products.
Please install and use the
products according to the following
directions to ensure normal
functioning and proper operation
of the products. If not to follow
these instructions to properly
install and normally use the
products, you will not get the
warranty-committed compensation
or protection. GlacialLight will not
take any responsibility for any
product damage caused by
improper installation or abnormal
usage.
3. The GL
SD60 series LED products feed only on a
DC voltage source having an appropriate output
voltage designated by the product specifications.
Please connect respectively the Brown (+) and
Blue (
) wires/terminals at the rear side of the
GL
SD60 series LED products to the Positive (+)
and Negative (
) wires/terminals of the DC voltage
source. It depends on the model in use that the
Brown (+) and Blue (
) wires may be not screwed
or screwed internally onto a terminal block.
Misusing an inappropriate voltage source or
reversing the correct voltage polarity may lead to
product damage.
(+) Brown
(-) Blue
CAUTION
CLASS 2 LED LIGHT
Do not stare at the beam.
Installation procedure should be undertaken by qualified technical personnel.
Input Current (Max.)
8A at 11V DC / 4A at 22V DC
305 mm
450 mm
135 mm
LED GL-SP60 IP65
Please be aware of
the correct DC
polarity before use.
