Stairville 347477, User Manual

Page: 38 / 56

This setting is only relevant if the device is controlled via DMX.
Press
[Mode] repeatedly, until the display shows ‘d.xxx’ and press [Setup] .
Now you can set the number of the first DMX channel to be used by the device (DMX address).
Use [Up] and [Down] to select a value between 1 and 512 (the display shows ‘d.001’ … ‘d.510’ ).
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible DMX address for the various DMX modes
Mode Highest possible DMX address
2-channel 511
6-channel 507
Press [Setup] . With [Up] and [Down] you can now select one of the following DMX operating
modes:
n
‘2-ch’ (four channels)
n ‘6-ch’ (six channels)
DMX mode
Operating
LED PAR
38