Stairville 347477, User Manual

Page: 34 / 56

7 Operating
Connect the device to the power supply to start operation. After a few seconds, the display
indicates that a reset is in progress. The device is then ready for use.
7.1 Operating on the unit
Press [Mode] to activate the main menu and select an operating mode. Use [Setup] to select
further options. Use [Up] and [Down] to change the respectively indicated value. When the dis‐
play shows the desired value, press [Mode] .
If you don't press any button for about ten seconds the display turns off. It will be reactivated
to display the previously called menu by pressing any button.
The set values are retained even when the device is disconnected from the mains power
supply.
Operating
LED PAR
34