Page 17
2.
Change the units to either Metric or USA units by pressing [LEVEL: ^], [3],
[1], [ENTER]. The console will display the current units - either “USA
UNITS” or “METRIC UNITS.” Use the [SELECT] key to change option, and
then press [ENTER].
3.
Choose the desired heart rate input preference by pressing [LEVEL: ^],
[3], [2]. The console will then display “HR INPUTS.” Press [ENTER]. The
console will then display the current hear rate input selection. Press the
[SELECT] key to scroll through the other options. Press [ENTER] after the
desired option.
4.
Change the language by pressing [LEVEL: ^], [3], [4]. The console will
display “LANGUAGE.” Press [ENTER]. The console will then display
the current language. Press the [SELECT] key to scroll through the other
options. Press [ENTER] to change the option.
5.
Adjust the contrast on the LCD screen by pressing [LEVEL: ^], [3], [5]. The
console will display “CONTRAST ADJ.” Press [ENTER]. The console will
then display the current contrast number. Press the [LEVEL: ^], and
[LEVEL:
∨
] keys to increase or decrease the contrast. The changed value
will remain on exit.
6.
Bikes only
. Turn the clinical mode on or off by pressing [LEVEL: ^], [3],
[3], [ENTER]. The console will display “CLINICAL MODE.” Press [ENTER].
Use the [SELECT] key to change option, and then press [ENTER].
7.
Reset the console to factory defaults by pressing [LEVEL: ^], [3], [9]. The
console will display “SET DEFAULTS .“ Press [ENTER]. Then console will
rest itself and then display “DONE.”
Machine Status Codes
[ ^ ] [ 4 ] [ 0 ] display machine run time in hours
[ ^ ] [ 4 ] [ 1 ] display number of workouts
[ ^ ] [ 4 ] [ 2 ] display distance traveled
[ ^ ] [ 4 ] [ 3 ] display software rev
[ ^ ] [ 4 ] [ 4 ] display machine type
[ ^ ] [ 4 ] [ 5 ]
-N/A-
[ ^ ] [ 4 ] [ 6 ] display machine run time in hours since last cleared
CONSOLE CODES
