Technical Procedure
Page 4
620-8590 Rev. A
14. Feed one end of the new push/pull brake cable
up through the bottom of the frame where
indicated.
NOTE:
Some early production units may have a circu-
lar opening rather than rectanguar as shown right.
15. Pull the push/pull brake cable up through and
out of the hole in the frame.
TECH TIP:
Use the supplied hook tool to grab the
push/pull brake cable and pull it up through the hole
while feeing the brake cable from the bottom.
16. Feed the new brake cable up through the user
left side handrail ensuring that the cable routes
BEHIND
the weight horn and swing arm as
shown.
17. Reinstall the user left side handrail using the
screws removed in Steps 11 + 12.
