Technical Procedure
Page 7
620-8590 Rev. A
30. Install the new resistance lever covers using a
3mm allen key. Ensure that the STOP icon is fac-
ing the rear of the machine.
31. Test the tension on the new cable by pulling the
lever all the way back to the STOP position, the
belt should not be moving while standing on the
unit while the lever is in this postion. If the belt
does move, refer to Step 25 as some adjustment
may be needed.
32. Install the new outer brake cover using a 4mm
allen key and the three (3) screws removed in
Step 1.
