Safety instructions
6
Safety instructions
Intended Purpose
MANOSKOP
®
721 and 730 Quick have been
designed for controlled tightening of screw joints in
a workshop environment. In order to loosen a nut or
bolt during the normal tightening process, the
MANOSKOP
®
can also be used in the opposite
direction. MANOSKOP
®
721 and 730 Quick may
only be used for these purposes. To do so, the
correct attachments must be used with the torque
wrench.
The „intended purpose“ includes full adherence to
the information contained in this instruction booklet,
in particular the safety instructions and technical
tolerance limits.
The buyer is required to ensure that all users
comply with these instructions.
Any use beyond the use described here is in breach
of the intended purpose.
The buyer and user are responsible for any damage
or injury resulting from non-adherence to these
instructions.
MANOSKOP
®
721 and 730 Quick have not been
designed for tightening of screw joints under
series production conditions. This might lead to
inaccurate readings as a result of inadvertent
operation of the sliding scale.
The MANOSKOP
®
may not be used for
uncontrolled loosening of nuts & bolts — for
example rusty joints. This may cause damage to
the torque wrench.
Therefore, avoid overloading the product by more
than 25%.
The MANOSKOP
®
may not be used as a
hammer. This will lead to injury and damage.
Structural features of the information on
dangers
CAUTION
Notices containing the word CAUTION
warn of a hazardous situation which
may lead to slight or moderate injuries.
Structural features of notices regarding
material and environmental damage
ATTENTION!
These notices warn of a situation
which leads to material or
environmental damage.
