40
For controlled counter clockwise
tightening using the Manoskop
®
730/2 to
730/65, the insert tool has to be rotated
through 180°. Ratchet insert tools also
need switching to „L“ (CCW) for the
correct tightening direction.
Uncontrolled loosening of
nuts & bolts ...
... opposite to the tightening direction is
possible. The cut-out mechanism is not
placed under load during this process.
Using the torque wrench
ã
C A U T I O N !
Important! Never exceed
a limit of 130% of the
maximum scale reading.
Do not use the tool for
loosening rusty nuts and
bolts. This may cause
damage to the torque
wrench. After such an
overload, the readings
may be inaccurate in
such a way that the user
does not notice.
ã
D A N G ER !
Before you use the
wrench, check that the
cut-out value is set to
the correct level and that
the insert tool is firmly in
place. Apply the tool in
such a way that it cannot
slip off the nut or bolt.
Otherwise, there is a
danger of injury or
damage.
