Operating Instructions MT-xx6-A
Assembly and disassembly
Page 32 of 60
R. STAHL HMI Systems GmbH / OI_MT_xx6_A_en_V_03_00_26.docx / 03.11.2020
12 Assembly and disassembly
12.1 General information
Assembly and disassembly are subject to general technical rules.
Additional, specific safety regulations apply to electronic and
pneumatic installations.
12.2 Cut-out MT-xx6-A-*
Make a cut-out with the following dimensions:
HMI device
Width
Height
Depth of cut-out Material thickness
MT-x06-A-*
385.5 ± 0.5 mm
[1.26 ± 0.0016 ft]
257.5 ± 0.5 mm
[0.84 ± 0.0016 ft]
150 mm [0.49 ft]
up to 8 mm
[0.0087 ft]
MT-x16-A-*
359.5 ± 0.5 mm
[1.18 ± 0.0016 ft]
257.5 ± 0.5 mm
[0.84 ± 0.0016 ft]
150 mm [0.49 ft]
up to 8 mm
[0.0087 ft]
MT-x36-A-*
427.5 ± 0.5 mm
[1.40 ± 0.0016 ft]
327.5 ± 0.5 mm
[1.07 ± 0.0016 ft]
165 mm [0.54 ft]
up to 8 mm
[0.0087 ft]
MT-x56-A-*
522.5 ± 0.5 mm
[1.71 ± 0.0016 ft]
412.5 ± 0.5 mm
[1.35 ± 0.0016 ft]
165 mm [0.54 ft]
up to 8 mm
[0.0087 ft]
12.3 Assembly free area
The area shown in the sketch must be kept free of all other
components or installations !
When the HMI devices are installed in enclosures supplied by
R. STAHL, these requirements are met.
HMI device
Width
Height
Depth
MT-x06-A-*
484 mm [1.59 ft] 356 mm [1.17 ft] 200 mm [0.66 ft]
MT-x16-A-*
458 mm [1.50 ft] 356 mm [1.17 ft] 200 mm [0.66 ft]
MT-x36-A-*
526 mm [1.73 ft] 426 mm [1.40 ft] 200 mm [0.66 ft]
MT-x56-A-*
621 mm [2.04 ft] 511 mm [1.68 ft] 215 mm [0.71 ft]
NOTICE
NOTICE
