Stahl MT 7 Series, Operating Instructions Manual

Page: 5 / 44

Operating Instructions MT-xx7 Table of contents

R. STAHL HMI Systems GmbH / OI_MT_xx7_en_V_01_02_14.docx / 06.12.2019 Page 5 of 44
9.5 MT-577-*-P2 (Thin Client) 22
9.6 MT-6x7 (KVM Systems) 23
10 Safety information 24
10.1 General Safety Information 24
10.2 Installation safety information 24
10.2.1 Only for HMI devices with DVI3 26
10.2.2 Tightening torque 27
10.2.2.1 Terminals 27
10.2.2.2 Cable glands 27
10.3 Safety information for operation 27
10.4 Special conditions 27
11 Assembly and disassembly 28
11.1 General information 28
11.2 Cut-out MT-xx7 28
11.3 Tightening torque 28
12 Operation 29
12.1 General information 29
12.2 Connections 29
13 General Information 32
13.1 Touch driver 32
13.2 MT-4x7 (Panel PC) and MT-5x7 (Thin Client) 32
13.2.1 Up to Windows 7 operating systems 32
13.2.1.1 Licensing issues 32
13.2.1.2 Note on Windows Embedded operating systems 32
13.2.2 Windows® 10 IoT Enterprise 2016 LTSB operating system 32
13.2.2.1 Recovery 33
13.2.2.2 Company-specific Windows installations 33
13.2.3 Initial start-up MT-4x7 (Panel PC) 33
13.2.4 Recovery Stick 33
13.2.5 Back-up 33
13.2.7 Data loss 34
14 Maintenance 35
14.1 Damaged sealing 35
15 Troubleshooting 35
15.1 Repairs / hazardous substances 35
16 Disposal 36
16.1 RoHS directive 2011/65/EC 36
17 Mounting inside enclosure with MT-xx7 mounting-set 37
18 Declaration of EC conformity 39
18.1 RCM 40
19 Release notes 42