Stahl KB2 Operating Instructions Manual Download Page 36

Page: 36 / 68

Operating Instructions KB2 Keyboards

Operation

Page 36 of 68



R. STAHL HMI Systems GmbH / OI_Keyboard_KB2_en_V_01_00_02.docx / 07.03.2022

10 Operation

Explosion hazard due to damaged device !

Non-compliance may result in fatal or serious injuries.

In case of damage or changes to the factory state:



Decommission device immediately.



Contact manufacturer.

Explosion hazard due to electrostatic charge !

Non-compliance may result in fatal or serious injuries



Do not paint / coat the device or retouch its paint / coating. All

repairs must be carried out by the manufacturer.



If additional sticky labels are attached, the specifications of

EN IEC 60079-0 must be observed.



Clean the device with a damp cloth only.

Hot surfaces !

Non-compliance may result in minor burns.
In ambient temperatures exc45 °C the surface of the device
may heat up.



Do not touch the device.



Conductive liquids on the trackball / touchpad may restrict functionality. This applies in

particular to salt water.
Avoid contamination of the trackball / touchpad with salt water.



Avoid trackball contamination as this may restrict functionality.



Regularly clean the trackball (see chapter

22.1 Trackball cleaning

10.1 Switching the device on and off

The device is switched on and off together with the operating device (HMI).
When the operating device is switched on, the device is immediately operational.

DANGER

WARNING

Summary of Contents for KB2





































































Search results

Summary of Contents for KB2

Reviews:

Related manuals for KB2

Brands by name

Popular brands

Stahl KB2, Operating Instructions Manual

Search results

Summary of Contents for KB2

Reviews:

Related manuals for KB2

Brands by name

Popular brands