Stahl Ex Plug Connector miniClix, Operating Instructions Manual

Page: 57 / 63

154099 / 8591601300
S-BA-8591-04-en-04/09/2009
Installation
23
Ex Plug Connector miniClix
8591/1, 8591/4
7.10 Locking mechanism
11392E00
The plug connector may be delivered with an optional locking mechanism. It can then be
safeguarded by means of a padlock when plugged in (hasp diameter 3 ... 6 mm).
7.11 Rotating the angled adaptor
11392E00
The position of an already screwed-in angled adaptor can be changed without having to
screw out the threaded support base (1).
X Unscrew the anti-twist device (2).
X Remove the screws (3).
X Rotate the angled adaptor to the desired position.
X Screw the screws (3) in the matching visible holes.
X Fasten the anti-twist device (2) again.
)
The union nut has to be unscrewn before undoing the connection.
)
The locking mechanism cannot be retrofitted.