HART-Multiplexer, Type 9192/32-10-10
Connection board, Type 9196/**H-***-***
FM
1 of 1
none
91 926 01 31 1
Einsiedler
04.05.
2007
Reistle
24.08.11
01
Kaiser
02
15.10.12
Reistle
Type 9192/32-10-10
The HART-Multiplexer Type 9192 is a nonincendive apparatus for installation in Non-Hazardous, Class I, Division 2
or Zone 2, Hazardous (Classified) Locations.
Type 9196/***-***-****
The Connection board Type 9196 is a nonincendive apparatus for installation in Non-Hazardous, Class I, Division 2
or Zone 2, Hazardous (Classified) Locations.
Connection board Type 9196/abH-def-ghi
ab = numeral 16 for number of channels
def = number or letter for automation system
gh = numeral for version
i
= letter for connecting technique
Notes:
1.
Installation should be in accordance with Article 504/505 of the National Electrical Code, ANSI/NFPA 70 and
ANSI/ISA RP 12.06.01.
2.
Installation in Canada should be in accordance with the Canadian Electrical Code, CSA C22.1, Part 1,
Appendix F.
3.
Use a general purpose enclosure meeting the requirements of IEC 61010-1 for use in Non-Hazardous or
Class I, Division 2, Hazardous (Classified) Locations.
4.
Use an FM Approved Dust-ignition proof enclosure appropriate for environmental protection in Class II,
Division 1, Groups E, F and G; and Class III, Hazardous (Classified) Locations.
5.
These devices are to be mounted on DIN rail.
6.
Ambient temperature: -
20°C … +70°C (any mounting position)
WARNING:
Do not disconnect equipment when a flammable or combustable atmosphere is present.
AVERTISSEMENT:
Ne pas débrancher l’équipement en présence d’atmosphère inflammable ou combustible.
Connector for
HART-Multiplexer
Connectors for supply
PLS
connector
Summary of Contents for 9192 Series
Page 37: ......
