226997 / 825060300050
2019-02-18·BA00·III·en·04
Returning the Device
19
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Ex d enclosure made from aluminium/flameproof
enclosure; 8250/0 series empty enclosure,
8250/1 series terminal box,
8250/5 series control panel/control box
9
Returning the Device
Only return or package the devices after consulting R. STAHL!
Contact the responsible representative from R. STAHL.
R. STAHL's customer service is available to handle returns if repair or service is required.
Contact customer service personally.
or
Go to the r-stahl.com website.
Under "Support" > "RMA", select "RMA - Request".
Fill out the form and send it.
Confirmation will be sent. R. STAHL's customer service will contact you.
You will receive an RMA form after speaking with customer service.
Send the device along with the RMA form in the packaging to
R. STAHL Schaltgeräte GmbH (refer to chapter 1.1 for the address).
10
Cleaning
Check the device for damage before and after cleaning it. Take damaged devices out of
operation immediately.
To avoid electrostatic charging, the devices located in hazardous areas may only be
cleaned using a damp cloth.
When cleaning with a damp cloth, use water or mild, non-abrasive, non-scratching
cleaning agents.
Do not use aggressive detergents or solvents.
Never clean the device with a strong water jet, e.g. using a high-pressure washer!
11
Disposal
Observe national and local regulations and statutory regulations regarding disposal.
Separate materials when sending them for recycling.
Ensure environmentally friendly disposal of all components according to the statutory
regulations.
12
Accessories and Spare Parts
NOTICE! Malfunction or damage to the device due to the use of non-original components.
Non-compliance can result in material damage.
Use only original accessories and spare parts from R. STAHL Schaltgeräte GmbH
(see data sheet).
Summary of Contents for 8250/0 Series
Page 65: ......
