133285 / 8118609300
2019-11-13·BA00·III·en·06
Safety
7
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Terminal Boxes
Series 8118/1, Series 8118/2
Impairment of IP protection
When installed properly and completely, the device will have the required IP degree of
protection. Making structural modifications to the device or mounting it improperly can impair
its IP protection. This may result in explosions causing serious or even fatal injuries to
persons in the vicinity.
Do not create any additional drilled holes to apply labels or plates (on the outside).
Only created drilled holes for cable entries exactly according to the instructions in the
"Product selection, project engineering and modification" and "Mounting" chapters of
these operating instructions. Consult with R: STAHL first if there are any discrepancies or
uncertainties.
Install the device only in the prescribed mounting position. More detailed explanations of
this can be found in the "Mounting" chapter.
Improper installation, commissioning, maintenance or cleaning
Basic work such as installation, commissioning, maintenance or cleaning of the device must
be performed only in accordance with the valid national regulations of the country of use and
only by qualified persons. Otherwise the explosion protection can be rendered ineffective.
This may result in explosions causing serious or even fatal injuries to persons in the vicinity.
Have the mounting, installation, commissioning and maintenance work performed by
qualified and authorised persons only (see chapter 3.2).
Only make modifications to the device according to the instructions in these operating
instructions. Have R. STAHL or a test body (third-party inspection) carry out acceptance
testing on any modifications made.
Perform maintenance and repairs on the device only using original spare parts and after
consultation with R. STAHL.
Gently clean the device with a damp cloth only and without scratching, abrasive or
aggressive cleaning agents or solutions.
Never clean the device with a strong water jet, e.g. a pressure washer!
3.3.2 Risk of Injury
Falling devices or components
The heavy device or components can fall during transport and mounting, causing severe
injury to persons in the form of bruises and contusions.
Use transporting and lifting equipment suitable for the size and weight of the device when
transporting and mounting it.
Observe the weight and the maximum load-bearing capacity of the device;
see specifications on the shipping label or on the packaging.
Use suitable mounting material for mounting.
Electric shock
During operation and maintenance, there are intermittent high levels of voltage at the device.
Because of this, the device must be de-energised during installation. Persons coming into
contact with electrical lines carrying excessively high voltage can suffer severe electric
shocks and consequently injuries.
Operate the device only on equipment with the internal voltage specified in the
"Technical data" chapter.
Connect electrical circuits only to suitable terminals.
Summary of Contents for 8118/1 Series
Page 49: ......
