Operation, Installation and Maintenance Manual for 6414/11-Series
ID-No.:
240912 / 6414603300
Publication Code: 2015-04-30:BA00.lll.en.00 Page - 5 - of 17
•
We cannot be held liable for damage caused by incorrect or unauthorized use or by non-compliance with these operating
instructions.
•
Before installation and commissioning, make sure that the device is not damaged!
•
Work on the device (installation, maintenance, overhaul, repair) may only be carried out by appropriately authorized and
trained personnel.
Safety Notes - Warnings
Use the devices only for their intended purpose!
We cannot be held liable for damage caused by an incorrect or unauthorized use or by non-observance of
these operating instructions.
Use the device only if it is undamaged.
The mounting arrangements must be secured with lock washers or self-locking nuts and bolts.
Any unauthorized work on the device is prohibited!
Installation, maintenance, overhaul and repair may only be carried out by appropriately authorized and
trained personnel. Non-compliance to this could be fatal or could result in damage to the property
Avoiding material damage
Non-compliance with the instruction can result in material damage to the device and/or its environment
3.3
Intended Use
The light fitting 6414/11 is equipment
•
for lighting areas, work spaces and objects
•
can be used indoor / Outdoor
•
for stationary mounting
•
for use in Zones 2, 21 & 22 and in the safe area
3.4
Modification and Alterations
WARNING
Danger due to modifications and alterations to the device! Explosion protection is
impaired!
Non-compliance results in severe or fatal injuries.
•
Do not modify or change the device.
No liability or warranty for damage resulting from modifications and alterations.
4.
Function and Device Design
DANGER
Explosion Hazard due to improper use!
Non-compliance results in severe or fatal injuries.
•
Use the device only according to the operating conditions described in these operating instructions.
