background image

Transport and storage

10

206676 / 614860300010

2019-10-10·BA00·III·en·05

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN

Portable Lamp

Series 6148

6

Transport and storage

6.1

General

• Transport and store the device only in the original packaging.

• Store the device in a dry place (no condensation) and vibration-free.

• Do not drop the device.

6.2

Batteries

• Do not transport together with other materials.

• Do not transport in explosive dust atmosphere.

• Store protected from fire, sources of dust, harmful gases and liquids.

• Store in a dry and cool location.

Recommendation:

• Store battery at an ambient temperature of +5 to +25 °C and a relative humidity of  

65 ±5 %. The storage period is reduced of up to one month if stored outside this  

temperature range.

7

Mounting and installation

NOTICE

Risk of deep battery discharge due to exceeded storage!

Non-compliance can result in material damage!

• The battery should be charged within 26 weeks from date of production by means 

of operating the luminaire.

DANGER

Explosion hazard due to incorrect installation of the device! 

Non-compliance results in severe or fatal injuries.

• Carry out installation strictly according to the instructions and national 

safety and accident prevention regulations to maintain the explosion 

protection.

• Select and install the electrical device so that explosion protection is not 

affected due to external influences, i.e. pressure conditions, chemical, 

mechanical, thermal and electric impact such as vibration, humidity and 

corrosion (see IEC/EN 60079-14).

• The device must only be installed by trained qualified personnel who is 

familiar with the relevant standards.

Summary of Contents for 6148 Series





























Reviews: