Stahl 6148 Series, Operating Instructions Manual

Page: 17 / 28

206676 / 614860300010
2019-10-10·BA00·III·en·05
Operation
17
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Portable Lamp
Series 6148
9.1.3 Switching off
• Press the pushbutton when the main light is blinking.
or
• Press the pushbutton at least 5 seconds after the last switching operation.
9.1.4 Dimming mode
• Press the pushbutton until the desired dimming level is reached.
The LED display shows the selected dimming level.
9.2 Emergency light operation
Charging unit:
• Connect to the supply voltage.
• Ensure that the "Power" LED lights up.
• Insert the portable lamp.
Portable lamp:
The portable lamp reacts when it is placed in the charging unit – it switches off any LEDs
that are switched on, performs a function test and indicates the state of charge and any
errors via the LED display.
In case of power failure, the portable lamp is switched on automatically.
WARNING
Risk of injury due to rotating parts under stroboscopic lighting.
Non-compliance can result in severe or fatal injuries.
• Do not use the dimming mode for rotating parts.
The portable lamp must be completely switched off before switching on
dimming mode.
DANGER
Explosion hazard when used in hazardous areas.
Non-compliance results in severe or fatal injuries.
• Only assemble and use the charging unit in safe areas.
In connection with the charging unit, the portable lamp can be used as
emergency light fitting.
In case of power failure, the main light will be switched on undimmed.