206676 / 614860300010
2019-10-10·BA00·III·en·05
Operation
23
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Portable Lamp
Series 6148
9.6
Troubleshooting
9.6.1 LED voltage errors
The main LED has no function.
Please refer to sequence LED indication.
Explanation of diagram:
• Field completely filled = LED lights up
• Field half-full: LED blinking
• Field empty = LED off
Troubleshooting
• Open the portable lamp (see chapter "Battery replacement").
• Disconnect and then reconnect battery.
• Close the portable lamp.
• Insert portable lamp into charging unit.
• Charge battery.
If the error cannot be eliminated using the mentioned procedures:
• Contact R. STAHL Schaltgeräte GmbH.
For fast processing, have the following information ready:
• Type and serial number of the device
• Purchase information
• Error description
• Intended use (in particular input / output wiring)
DANGER
Explosion hazard if the device is opened in a hazardous area.
Non-compliance results in severe or fatal injuries.
• Only open the device in a safe area.
red
green green green green Description
LED input voltage too high
LED input voltage too low
Summary of Contents for 6148 Series
Page 28: ......
