200128 / 8006603300
2021-10-27·BA00·III·en·10
Safety
5
DE
EN
FR
IT
ES
RU
NL
DK
SE
FI
PT
GR
PL
CZ
SK
HU
SL
RO
BG
LV
LT
EE
CH
KR
CN
Load and motor switch/
control switch
Series 8006/4
3
Safety
The device has been manufactured according to the state of the art of technology while
observing recognised safety-related rules. When using the device, it is nevertheless possible
for hazards to occur to life and limb of the user or third parties or for the device, environment
or material assets to be compromised.
▶
Use the device only
- if it is not damaged
- in accordance with its intended use, taking into account safety and hazards
- in accordance with these operating instructions.
3.1
Intended Use
The 8006/4 load and motor switch meets all the requirements for use as a motor switch or
main switch.
It is used to switch electrical and electronic components that are used for the open and
closed-loop control, switching and monitoring of electrical machinery and systems.
When installed in a suitable enclosure, the device can be used in gas hazardous areas of
Zones 1 and 2 or in a safe area. Since these switches are incomplete electrical equipment,
they must be installed in an enclosure with the "increased safety" Ex e type of protection.
"Intended use" includes complying with these operating instructions and the other applicable
documents, e.g. the data sheets. All other uses are only intended after being approved by
R. STAHL.
3.2
Personnel Qualification
Qualified specialist personnel is required to perform the activities described in these
operating instructions. This primarily applies to work in the following areas
• Product selection, project engineering and modification
• Mounting/dismounting the device
• Installation
• Commissioning
• Maintenance, repair, cleaning
Specialists who perform these activities must have a level of knowledge that meets
applicable national standards and regulations.
Additional knowledge is required for any activity in hazardous areas! R. STAHL recommends
having a level of knowledge equal to that described in the following standards:
• IEC/EN 60079-14 (Project engineering, selection and construction of electrical systems)
• IEC/EN 60079-17 (Electrical Installations Inspection and Maintenance)
• IEC/EN 60079-19 (Equipment repair, overhaul and reclamation)
Summary of Contents for 169545
Page 16: ......
