1. SL100_User’s Manual_2018
33
8. options
8.15 Overhang Rigging Bar or F.O.H. installation kit
8.15.1 List of Materials
• The overhang rigging bar (F.O.H.) kit contains:
-Two (2) rigging pipes.
-Four (4) overhang pipes.
-Eight (8) 4.5” pins.
-Eight (8) ¼” lynch pins.
-Four (4) plastic sliders.
-Four (4) 2” pins.
-Four (4) 3/16” lynch pins.
8.15.2 Installation Procedure
• Lower the front roof panel to a comfortable working height.
j
• Locate the second and fifth bottom “V groove” of the roof panel T2 truss and install plastic sliders.
Secure with a 2” pin and a 3/16” lynch pin.
k
• Slide each of the 4 overhang pipes over the sliders and secure them to the center roof T1 truss as shown.
l
• Use a 4.5” pin and a 1/4” lynch pin and lock in place.
m
• Pin both rigging pipes to the other end of the overhang pipes with the remaining 4.5” pins and 1/4” lynch pins.
n
1
3
4
5
2
