STACYC 12EDRIVE, Original Instructions Manual

Page: 16 / 29

P a g e | 16 P a g e |
Power Switch
→
”OFF”
Throttle → ”FULL” position
HOLD THROTTLE IN FULL
POSITION
Power Switch → ”ON”
Throttle → ”FULL” position
LED → flashing YELLOW
5 yellow flashes
Selection MODE:
Throttle
→ ”LOW” position
LED → solid RED
(training mode)
Selection MODE:
Throttle
→ ”MID” position
LED → solid YELLOW
(standard mode)
Selection MODE:
Throttle
→ ”FULL” position
LED → solid GREEN
(advanced mode)
Power Switch → ”ON”
Throttle → ”FULL” position
LED → flashing GREEN, YELLOW
AND RED
5 Green/Yellow/Red flashes with
5 beeps, all LEDS stay lit, release
throttle, all LED lights off, ready
to choose power model
Select Program:
6. Turn throttle, and as the throttle moves through the range of power
modes, the Red, Yellow, or Green LED light will illuminate.
7. Hold Throttle at the power mode (LED position) desired
approximately 5 seconds until “2 short beeps” are heard.
o Red→training mode (slow)
o Yellow→standard mode (medium)
o Green→advanced mode (fast)
Exit Program Selection:
8. Release throttle.
9. All LED lights flash together 1 time with “1 long beep”.
10. LED Light indicating selected power mode will now be illuminated.
o Operation of cycle will be with the illuminated power
mode. Cycle will stay in this power setting unless changed
as per steps above:
o Red→training mode (slow)
o Yellow→standard mode (medium)
o Green→advanced mode (fast)