P a g e |
15
Power
→
”ON”
Throttle
→
5%-10% rotation
LED
→
Green, Yellow, Red
(Full Battery Charge)
Power
→
”ON”
Throttle
→
5%-10% rotation
LED
→
Red
(Low Battery Charge)
Power
→
”ON”
Throttle
→
5%-10% rotation
LED
→
Yellow and Red
(Med-Low Battery Charge)
5. If you continue to twist the throttle (10%+), the motor will be
activated. The more the throttle is twisted, the more power is
delivered to the motor, based on the power program selected.
6. Exercise caution around moving parts and wheels.
7. Contact customer service or go visit:
www.STACYC.com if unsure about any operational
procedure.
CHANGING POWER MODES (TO BE PERFORMED BY ADULTS ONLY)
Your cycle is equipped with 3 power modes for different skill levels. Training Mode,
Standard Mode and Advanced Modes. We do not advise showing children how to
adjust the modes. Each child should have the mode set by an adult who will be close-
ly supervising the child. DO NOT put your child on the “Advanced” mode without
working through the process of learning the Training and Standard Modes.
Activate Program Selection:
1. Ensure power switch is in “OFF” position.
2. Install Battery.
3. Ensure bike power switch is “OFF” and no LED lights are on, or no
beeps were heard.
o If any LED light is on, turn bike Power Switch to “OFF”
o If you heard a beep, turn bike Power Switch to “OFF”
4. Turn throttle gently and hold throttle in “FULL” position. Do
not release.
5. Turn power switch to “ON” position , do not let throttle move from
“FULL” position.
o The yellow LED light will flash 5 times, then all the LED lights
will flash and beep 5 times, all LEDs will remain lit. Wait 1 sec,
then release throttle. All LED lights should be off.
o If LED lights are on, repeat from step 3, and be sure not to
twist the throttle quickly as it is not in Program Mode.
